1.5V R14 UM2 Heavy Duty C Battery

A C battery measures 50 mm (1.97 in) length and 26.2 mm (1.03 in) diameter.The C battery (C size battery or R14 battery) is a standard size of dry cell battery typically used in medium-drain applications such as toys, flashlights, and musical instruments.Like the D battery, the C battery size has been standardized since the 1920s.

Products Details

Battery weight and discharge capacity Battery weight: 40g Discharge capacity: 1200mAh (load 3.9Ω, 24h/day, 20±2℃, RH60±15%, termination voltage 0.9V) Open circuit voltage, load voltage and short circuit current Discharge capacity

Discharge temperature: 20±2℃

Discharge condition

GB/T8897.2-2008

national standard requirements

Minimum average discharge time

Discharge load

Discharge method

End

voltage

 

New electricity within 2 months

12 months storage at room temperature

6.8Ω

1h/d

0.9 V

9h

10h

9h

20Ω

4h/d

0.9 V

27h

32h

28h

3.9Ω

4m/h,8h/d

0.9 v

270min

300min

270min

3.9Ω

1h/d

0.8 V

3h

5.5h

4.9h

3.9Ω

24h/d

0.9 V

/

4.5h

4h

Compliance with minimum average discharge time: 1. Test 9 batteries for each discharge mode; 2. The average discharge value of 9 batteries is greater than or equal to the specified value of the minimum average discharge time, and the number of batteries whose single-cell discharge time is less than 80% of the specified value is not more than 1, then the battery electrical performance test of the batch is qualified; 3. If the average discharge value of 9 batteries is less than the specified value of the minimum average discharge time and (or) the number of batteries less than 80% of the specified value is greater than 1, then another 9 batteries are tested and the average value is calculated. If the calculation result meets the requirements of Article 2, the electrical performance test of the batch of batteries is qualified. If not, the battery electrical performance test of the batch is unqualified and no further testing.Safety performance requirements Identification The following marks are marked on the battery body: 1. Model: R14P/C 2. Manufacturer or trademark: Sunmol ® 3. Battery polarity: "+" and "-" 4. Deadline of shelf life or manufacturing year and month 5. Precautions for safe useStorage and validity period 1. The battery should be stored in a well-ventilated, cool and dry place. 2. The battery should not be exposed to direct sunlight or placed in rain for a long time. 3. Do not mix the batteries with the packaging removed. 4. When stored at 20℃±2℃, relative humidity 60±15%RH, the battery shelf life is 2 years.

With product technical updates and technical parameter adjustments, the specifications will be updated at any time, please contact Anida in time to obtain the latest version of the specifications.

Typical discharge curve Discharge environment: 20℃±2℃, RH60±15%Overview This specification stipulates the technical requirements of Anida R14P carbon zinc manganese dry battery. If other detailed requirements are not listed, the battery technical requirements and dimensions should meet or exceed GB/T8897.1 and GB/T8897.2. 1.1 Reference Standard GB/T8897.1 (IEC60086-1, MOD) (Primary Battery Part 1: General Provisions) GB/T8897.2 (IEC60086-2, MOD) (Primary battery Part 2: Dimensions and technical requirements) GB8897.5 (IEC 60086-5, MOD) (Primary battery Part 5: Safety requirements for aqueous electrolyte batteries) 1.2 Environmental standards The battery complies with EU 2006/66/EC battery directiveElectrochemical system, voltage and naming Electrochemical system: zinc-manganese dioxide (ammonium chloride electrolyte solution), no mercury Nominal voltage: 1.5V Designation: IEC: R14P ANSI: C JIS: SUM-2 Others: 14FBattery size The battery meets the requirements of the sketch 3.1 Acceptance tools Use a vernier caliper with an accuracy of not less than 0.02mm to prevent battery short circuit during measurement. One end of the caliper should be pasted with a layer of insulating material. 3.2 Acceptance method Adopt GB2828.1-2003 normal inspection one-time sampling plan, special inspection level S-3, acceptance quality limit AQL=1.0

project

Open circuit voltage OCV (V)

Load voltage CCV (V)

Short circuit current SCC (A)

Sampling standard

 

New electricity within 2 months

1.60

1.40

5.0

GB2828.1-2003 One-time sampling plan for normal inspection, special inspection level S-4, AQL=1.0

12 months storage at room temperature

1.56

1.35

4.00

Test Conditions

Load resistance 3.9Ω, load time 0.3 seconds, test temperature 20±2℃

project

condition

Claim

Eligibility criteria

Overdischarge

Under the condition of 20±2℃ and humidity 60±15%, the load resistance is 3.9Ω. Discharge for 1 hour per day to 0.6V termination

 

No leakage by visual inspection

N=9

Ac=0

Re=1

High temperature storage

Store at 45±2℃, relative humidity 90%RH for 20 days

 

N=30

Ac=1

Re=2

project

condition

Claim

Eligibility criteria

External short circuit

At 20±2℃, connect the positive and negative poles of the battery with wires and leave it for 24 hours

Does not explode

N=5

Ac=0

Re=1

Liquid leakage resistance performance requirementsPrecautions for use 1. This battery is not rechargeable. If you charge the battery, there may be danger of battery leakage and explosion. 2. Make sure to insert the battery correctly according to the polarity (+ and -). 3. It is forbidden to short-circuit, heat, throw into fire or disassemble the battery. 4. The battery should not be over-discharged, otherwise the battery will swell, leak or the positive cap will top out and damage electrical appliances. 5. New and old batteries, batteries of different brands or models cannot be used together. It is recommended to use batteries of the same brand and the same model when replacing. 6. The battery should be removed when the electric appliance is not used for a long time. 7. Take out the exhausted battery from the electric appliance in time. 8. It is forbidden to weld the battery directly, otherwise the battery will be damaged. 9. The battery should be kept away from children. If swallowed accidentally, seek medical attention immediately.Regular packaging There is 1 inner box for every 12 sections, 24 boxes in 1 carton. It can also be packaged according to customer requirements, and the actual quantity indicated on the box mark shall prevail.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours