Shop Directly From The Manufacturer Of DG Sunmo 1.5V Alkaline AAA Batteries

Weight and discharging capacity Battery weight about: 10.5g Discharging capacity: 1000mAh(Loading75Ω, 4h/day, 20±2℃ RH60±15%, End-point Voltage0.9V) Open circuit voltage, loading voltage and short-circuit currentDischarging Ability

Discharging Temp：20±2℃
Condition			GB/T8897.2 Requirements	Shortest Average Discharging Time
Load	Discharging Way	End-point Voltage		2 months new battery	12 months storage battery
10Ω	1h/d	0.9 V	6h	7.5h	6.8h
75Ω	4h/d	0.9 V	50h	60h	55h
5.1Ω	4min/h,8h/d	0.9 V	145min	160min	145min
24Ω	15s/min,8h/d	1.0 V	14.5h	18h	16h
20Ω	24h/d	0.9 V	/	15h	13.5h
3.9Ω	24h/d	0.9 V	/	135min	110min

Accordance of shortest discharging time 1. Testing 9 batteries of each discharging way 2. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement 3. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again. This lot of batteries are qualified if the result meets the NO.2 provision. If not qualified then will not test again.Safety RequirementsSigns The following signs are on the battery body 1. Model: LR03/AAA 2. Manufacturer and brand: Sunmol ® 3. Battery Poles:"+"and"-" 4. Expiry date or manufacturing date 5. Warnings.Normal Package Each 2, 3 or 4 batteries in a shrink package, 60 pieces in one inner box, 12 boxes in one carton.

Nominal discharging curve Discharging condition: 20℃±2℃, RH60±15%

Scope This specification provides the technical requirements of alkaline manganese dioxide battery(LR03).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is no any other detail requirements. 1.1Reference Standards GB/T8897.1 (IEC60086-1, MOD)（Primary Battery Part 1: General） GB/T8897.2 (IEC60086-2, MOD)（Primary Battery Part2: Size and Technical requirements） GB8897.5 (IEC 60086-5, MOD)（Primary Battery Part5: Safety of batteries with aqueous electrolyte） 1.2Environmental Protection Standard The battery meets the standard of EU battery directives 2006/66/EC.Chemical system, Voltage and Designation Chemical system: Zn-MnO2(KOH), without Hg & Cr Nominal Voltage: 1.5V Designation: IEC: LR03 ANSI: AAA JIS: AM-4 Others: 4003,E92 Operating Temp Range Spec of -20℃ to +60℃Battery Size Battery meets the picture standard 3.1 Inspection Tool Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers. 3.2 Acceptance Method Using GB2828.1-2003 sampling program, special sampling S-3, acceptance quality limitation: AQL=1.0

Project	Open circuit Voltage（V）	Loading Voltage（V）	Short-circuit Voltage（A）	Sampling Voltage
In 2 months New battery	1.59	1.40	5.00	GB2828.1-2003 One Sampling, special sampling S-4,AQL=1.0
12 months storage in room temperature	1.56	1.35	4.00
Inspection Condition	Loading 3.9Ω, loading time 0.3s，temp:20±2℃

Project

Condition

Requirements

Qualified

Standard

Over Discharging

Continuous discharging 48h in 20±2℃, huminity60±15%, load 10Ω condition.

No leakage by visual inspection

N=9

Ac=0

Re=1

High-temp storage

Storing in 60±2℃, relative humidity 90% condition for 20 days.

N=30

Ac=1

Re=2

Project

Condition

Requirements

Qualified Standard

External Short-circuit

Using wire to connect positive and negative pole in 20±2℃ for 24h.

No Explosion

N=5

Ac=0

Re=1

Improper Equipment

4 batteries in series connection, one of them is in reverse connection.

Leakage happened on the reversed battery or the shell temp reduce to room temp

N=4×5

Ac=0

Re=1

Anti-leakage abilityCautions for using 1. This battery can’t be charged, leakage and explosion may happen when charging. 2. Make sure the battery is in correct position as + and -. 3. Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited. 4. Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap. 5. New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries. 6. The battery should be taken out from the device which will not be used for a long time. 7. Exhausted battery should be taken out from the device. 8. Welding batteries are prohibited or it will cause damage. 9. The batteries should be kept from children, if swallowed, contact a doctor immediately.Storage and Expiry 1. Batteries should be put in cool, dry and with air-flowing places 2. The batteries should not be exposed in sunshine or in raining places. 3. Do not mix the batteries which without labels 4. Storing in 20℃±2℃, 60%±15%RH condition. The storage time is 3 years.With the progress of product technology, technical parameters, the specification will be updated too, please contact Anyida for latest specification.Q1. Could you do customer brand? A:Of course ,we could provide professional OEM service. Q2. What is your terms of packing? A: Generally, we pack our batteries in carton .If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. Q3. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance, OR LC at sight , DP Q4. What is your terms of delivery? A: EXW, FOB, CIF,CNF Q5. How about your battery delivery time? A: Within 35 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q6. What is your mini rechargeable battery sample policy? A: We can supply the free mini rechargeable battery sample battery, but the customers have to pay the courier cost. Q7: How do you make our business long-term and good relationship? A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from. Q8.Is this product safe? A: Anti short circuit & Anti scald, Anti explosion,Environmental friendly. Q9.What’s the MOQ? A:Small quantity is OK for trial order or samples if we have stock,customize brand or customize request please contact us. Q10：what is advantage of being our sunmol sole agents ? A:We are not only offer the disocudn prices and reliable quality product but also we can offer free a set of gift for you to promoted our brand . once your reache our goals and we can refund comission or send free goods to support your selling.

DG Sunmo 1.5V LR03 AM4 Alkaline AAA Battery

Products Details

Featured Products

Contact us